GiMeSpace Power Control

In this article, I am going to share with you the 10 best GiMeSpace Power Control alternatives in 2024 that you can use.

• GiMeSpace Power Control description and review
• Alternatives to GiMeSpace Power Control for all platforms with any license
• GiMeSpace Power Control: pros and cons
• GiMeSpace Power Control: Price
• Benefits
• FAQ

GiMeSpace Power Control description and review

When you want to save battery on a laptop or save power and have a cool and quiet computer, it is best to use that “Power Saving” power scheme. However, sometimes you want to use the full power of your computer when loading programs or performing specific CPU-intensive tasks. Even the “Balanced” energy scheme doesn’t allow you to have the best of both worlds. This program automatically switches between low and high power power plans based on CPU load. This way, you will always save energy when power is not needed, but also make all power available once the system needs it….

At the top of the GiMeSpace Power Control window, you can select the 2 power schemes you want to switch between, they can be the system default schemes or custom schemes. It is recommended to use “Energy Saving” as the low-power scheme and “Balanced” as the high-power scheme. “Balanced” provides more dynamic CPU frequency settings than the “High Performance” scheme.

You can then adjust the CPU loads that cheat a switch between schemes. The low setting is the percentage that will cause a switch to the low power scheme if the CPU load falls below this number. Around 10-20% usually works well. The high setting is the percentage that will cause a switch to the high power scheme if the CPU load exceeds this number. Around 50-60% usually works well.

Note that once a change to the high power scheme has been made, the CPU load drops automatically because more CPU capacity is available at a higher frequency. You can then select the minimum time that must pass before a backshift is allowed. This to avoid too many changes. The last setting is the one that tells this program how often to check the CPU load. At 0.5 seconds, the program will respond very quickly to sudden changes in CPU load; however, because the load is measured over such a short period of time, it could react to small spikes in CPU load.

This program automatically switches between low and high power power plans based on CPU load. This way, you will always save power when power is not needed, but will also make all power available once the system needs it.

Created by GiMeSpace

This way, you will always save power when power is not needed, but will also make all power available once the system needs it.

At the top of the GiMeSpace Power Control window, you can select the 2 power schemes you want to switch between, they can be the system default schemes or custom schemes. It is recommended to use “Energy Saving” as the low-power scheme and “Balanced” as the high-power scheme. “Balanced” provides more dynamic CPU frequency settings than the “High Performance” scheme.

You can then adjust the CPU loads that cheat a switch between schemes. The low setting is the percentage that will cause a switch to the low power scheme if the CPU load falls below this number. Around 10-20% usually works well. The high setting is the percentage that will cause a switch to the high power scheme if the CPU load exceeds this number. Around 50-60% usually works well.

Note that once a change to the high power scheme has been made, the CPU load drops automatically because more CPU capacity is available at a higher frequency. You can then select the minimum time that must pass before a backshift is allowed. This to avoid too many changes. The last setting is the one that tells this program how often to check the CPU load. At 0.5 seconds, the program will respond very quickly to sudden changes in CPU load; however, because the load is measured over such a short period of time, it could react to small spikes in CPU load.

Link to the official GiMeSpace power control site

Official website

Alternatives to GiMeSpace Power Control for all platforms with any license

Battery care

BatteryCare is software created to optimize the use and performance of the modern laptop battery.

Acubattery

Monitor the battery capacity by using science.

Battery mode

Replace the default Windows battery indicator with a more powerful and useful one. Provides backlight control, easy selection of power scheme, detailed battery information …

BatteryAlarm 40-80%

Check your laptop battery.

Bearing surface

Aerofoil extends the battery life of Vista and Windows 7 laptops by: * Allowing you to manually disable Aero Glass. * Optional Aero Glass user management …

Power scheme switch

This is a very simple utility that exposes an icon to the systray and allows you to quickly change the power plan scheme from there. – Shows the asset …

Power plan wizard

Power Plan Assistant is a power management tool, for Microsoft Windows 7/8 and Training ground Apple Macbook Pro / Air enabled laptops.

Corporate Empire

Impero combines remote control on an intuitive real-time CCTV such as a live remote thumbnail interface with its advanced computer activity monitoring technology to create a …

Know more alternatives to GiMeSpace Power Control?

Power Manager Professional

Automate, manage and reduce the running costs of your customers’ Macs with Power Manager Professional. Power Manager Professional will save you and your …

Power switch

Power switch – Automatically switches between power plans based on power source for maximum system and backup performance. Easily switch between power …

GiMeSpace Power Control: pros and cons

GiMeSpace Power Control: Price

The software of GiMeSpace Power Control gives you easy and efficient management, and GiMeSpace Power Control allows you to concentrate on the most important things. And it’s easy to use; you may love it.

Benefits

FAQ